Uncategorized
Hard-liner Bezalel Smotrich was just put in charge of Israel’s settlements. Here’s what that means.
(JTA) – Last week, Israeli Finance Minister Bezalel Smotrich got one of his longtime wishes: authority over the civilian life of settlers, and some Palestinians, in the West Bank. The role is a chance for Smotrich, a right-wing firebrand and staunch advocate of annexing settlements to Israel, to mold the territory according to his ideology.
But this week, the perils of the job also became clear: After a Palestinian gunman shot and killed two Israelis in the village of Huwara on Sunday, a mob of settlers rampaged in the village, burning cars and buildings and injuring residents.
In the days following, at least publicly, Smotrich has appeared conflicted over his response to the riots. He liked a tweet calling to “wipe out” the village, then issued his own tweet addressed to his “settler brothers” decrying the rampaging. Then he shared a third set of tweets that endorsed collective punishment — but not through mob violence — and compared the riot to nonviolent protests in Tel Aviv.
Later in the week, he sympathized with the rioters and their goal. On Tuesday, he published a lengthy Facebook post in which he called the rioters “a small group whose patience ran out and who acted inappropriately.” Part of him, he wrote, wanted “to identify with the pain and the anger and the feeling that it’s impossible to sit quietly any longer.”
On Wednesday, a journalist asked him to explain why he liked the tweet calling for the village to be “wiped out.” “Because I think the village of Huwara should be wiped out, I think that the state of Israel should do it.” A few hours later, he again walked back his statement: “To remove any doubt, in my words I did not mean wiping out the village of Huwara, but rather acting in a targeted way against terrorists and supporters of terror, and exacting a heavy price from them in order to return security to local residents.”
Sunday’s violence points to the contentious issues Smotrich will have to handle in his new role, coping with escalating violence as he and his partners seek to reshape life in the West Bank.
Both Smotrich and his ideological foes are portraying his new job as the harbinger of a sea change in the territory — one that will expand the settlements and make them more entrenched. Meanwhile, the current Israeli government, which includes Smotrich and his far-right allies, has promised to build and recognize more settlements.
“The transfer of civilian authority over the settlements to us, and the beginning of the process of normalizing settlements, are also a great and strategic achievement,” he wrote in the Facebook post on Tuesday. “Even if it takes time to ripen and change the rudder of the ship, it will lead, God willing, to a dramatic change.”
Here’s a rundown of who Smotrich is, what his new job involves, how it fits in with the Israeli government’s settlement plans, and what his limits are.
Who is Bezalel Smotrich, and what job did he just receive?
Smotrich, 43, is himself a settler and has served in Israel’s parliament, the Knesset, for nearly eight years. During that time, he’s been one of the most right-wing lawmakers in Knesset, and has faced blowback for comments denigrating Arab women and the LGBTQ community.
He has also spent years calling for the annexation of settlements and proposing legislation to that effect, to no avail. But his fortunes changed last year, when his party, Religious Zionism, won 14 seats, becoming the Knesset’s third-largest party.
The coalition agreement the party signed in December with Israeli Prime Minister Benjamin Netanyahu pledges to give Smotrich authority over civilian life in the settlements. Governing all aspects of civilian life in the settlements is currently the province of Defense Minister Yoav Galant, and he and Smotrich clashed over the past couple of months.
Smotrich made clear he was impatient to assume the new role, and was worried Netanyahu was balking. “Defense minister Galant’s disavowal of the unequivocal agreement, and the prime minister’s foot-dragging on the matter are unacceptable and will not be allowed to continue,” he wrote on Twitter on Feb. 15.
But Netanyahu fulfilled the coalition agreement on Thursday, and in a deal signed by Netanyahu, Smotrich and Galant, Smotrich was handed authority over day-to-day affairs in the settlements. He tweeted that the deal entailed “A holiday for the residents of Judea and Samaria,” the Israeli government’s term for the West Bank.
Does that mean Smotrich is about to annex the settlements to Israel?
No. The agreement explicitly counts out annexation, and Smotrich was at pains in December to assure Americans, in a Wall Street Journal op-ed, that annexation was not happening in the immediate future.
But Smotrich is now in charge of life in Area C of the West Bank, which makes up the bulk of the territory. All of the Israeli settlements are in Area C, where Israel has full control over civilian affairs. (The Palestinian Authority governs civilian life in Areas A and B, which comprise 40% of the West Bank and include the majority of the territories’ Palestinians.)
That is why critics of Netanyahu’s government are claiming that an annexation plan is at the heart of Netanyahu’s agreement with Smotrich. Michael Sfard, a prominent Israeli human rights lawyer, wrote that Smotrich is now effectively “the governor of the West Bank,” because he will be able to largely erase legal boundaries between the settlements and Israel’s recognized borders.
“Today the government of Israel has taken an action which entails de jure annexation of the West Bank,” wrote in posts on social media. “Transferring powers to Israeli civilian hands is an act of de jure annexation because it entails removing power from the occupying military and placing it directly in the hands of the government — this is an expression of sovereignty.”
Who’s in charge of Israel’s West Bank policy?
The particulars of the new arrangement in the West Bank, according to the deal signed on Thursday, are complex and a bit confusing. Smotrich is responsible for land use by Israelis and Palestinians in Area C, but it’s not clear if he has authority over Palestinian freedom of movement into and out of the area. His full responsibilities are listed in annexes not made public. The military, meanwhile, retains the authority to evacuate illegally built settlement outposts, though Smotrich may be able to stall that process.
That means it’s not clear who’s on top, except for a provision that makes Netanyahu the arbiter of any disputes between Smotrich and Galant, or Smotrich and the military.
The agreement does pledge to erase divisions between Israel and the Jewish settlements. It says Smotrich will launch an initiative called “Equality of Citizenship” that will “improve and streamline services in Judea and Samaria” through Israeli government ministries — that is, not via the military that has been in charge of such matters for more than half a century.
How is the U.S. responding?
The Biden administration, which has otherwise maintained friendly engagement with Netanyahu’s new government, had reportedly pressured him to renege on the new job for Smotrich. Biden officials found an ally on that issue in Israel’s defense establishment, which also was loath to hand over any degree of control to Smotrich, Axios reported.
And confusion in the chain of command when it comes to dismantling settlements may prompt the Biden administration to intervene, said Daniel Kurtzer, a former U.S. ambassador to Israel.
“The critical issues that we need to look at, they’re happening all over the place, whether it’s the transfer of authority from the Minister of Defense to Minister Smotrich for control over the civil administration, whether it’s the regularization of these outposts or their legalization,” said Kurtzer, who was speaking in a Zoom call last week organized by the Jewish Democratic Council of America.
Criticism also came from Israel’s opposition. Benny Gantz, a former defense minister and IDF chief of staff, tweeted out a confusing flow chart of the new division of responsibilities between Smotrich and Galant.
“This doesn’t look like a chain of command,” he wrote. “This looks like a labyrinth that endangers Israel’s security.”
What’s next?
Smotrich has already said he plans to accelerate the building of Jewish settlements and limit building by Palestinians in Area C. Palestinians say they build without permits in the area because the Israeli authorities rarely grant building permits. That’s unlikely to change now.
On Tuesday, Smotrich pledged that an illegal settlement that has repeatedly been dismantled will be rebuilt and recognized by the government. And his first comment after the agreement was reached was to reiterate his pledge to limit Palestinian rights.
He said, “We will act with determination to stop the illegal Arab takeover of open lands in Judea and Samaria.”
—
The post Hard-liner Bezalel Smotrich was just put in charge of Israel’s settlements. Here’s what that means. appeared first on Jewish Telegraphic Agency.
Uncategorized
JACQUELINE HOCHMAN JUNE 7, 1938 – APRIL 1, 2025
Jacqueline “Jackie” Hochman passed away peacefully on April 1, 2025 at the Simkin Centre in Winnipeg at the age of 86.
Jackie was born on June 7, 1938. She is predeceased by her husband Sam, daughter Robyn, parents Samuel and Bertha “Birdie” Niznick, and brother Allyn.
Jackie will be deeply missed by her remaining children, Marshall and Shawn (Karen), her grandchildren, Hannah, Daniel (Jodi), and Freya (and her partner, Spencer), and her great-granddaughter, Haisley.
Her children and grandchildren were her world. Jackie will be remembered for her fierce love and unwavering devotion to family. Sam, her husband of 65 years, loved her with every fibre of his being. May her memory be a blessing. In lieu of flowers, the family kindly requests that donations be made to the Saul and Claribel Simkin Centre.
Features
Samsung Washing Machine Repair: Frequent Issues and Professional Fixes
When your Samsung washing machine begins acting up, it can throw your entire laundry routine into chaos. Even with cutting-edge technology and sleek designs, these appliances can develop issues that range from minor glitches to major malfunctions. This comprehensive guide will take you through the most common problems encountered with Samsung washers, walk you through initial diagnostic steps, and explain when and why professional repairs become essential. For more detailed repair insights, Discover more here.
Understanding the Challenges
Samsung washing machines are celebrated for their innovative features, energy efficiency, and robust performance. Yet, like all complex machinery, they are susceptible to wear and tear. Users often report issues such as:
- Error Codes: Cryptic digital messages indicating malfunctioning sensors or control board errors.
- Water Drainage Problems: Incomplete draining leading to wet clothes or water pooling in the drum.
- Excessive Vibration or Noise: Unusual sounds during spin cycles, often a sign of imbalance or mechanical wear.
- Leaking Water: Water escaping from the machine, which can damage floors and other nearby surfaces.
- Door Lock or Latch Failures: Problems with door sensors or locking mechanisms that prevent the machine from starting.
- Motor or Pump Issues: Malfunctions that affect the washer’s ability to agitate, drain, or complete cycles properly.
Each of these issues may have different root causes, and understanding them is the first step to determining whether you can fix it yourself or need professional assistance.
Step-by-Step Diagnostic Process
Before jumping into repairs, it is wise to perform a systematic diagnostic check. Begin by noting any error codes displayed on your machine’s control panel. Samsung models typically provide codes such as “4E” (water inlet issues) or “5E” (drainage errors), which can guide your troubleshooting efforts.
Initial Checks:
- Power and Settings: Ensure the washer is properly plugged in and that the selected cycle includes the drain phase.
- Water Supply: Verify that the water inlet is unobstructed and that water pressure is sufficient. Low water pressure can sometimes trigger fill errors.
- Drainage System: Inspect the drain hose for kinks or blockages. Remove any debris that may hinder the water flow.
Advanced Checks: For more persistent issues, consider:
- Cleaning filters and pump components to remove lint or foreign objects.
- Checking sensor contacts and wiring for signs of corrosion or loose connections.
- Observing the machine during a test cycle to listen for unusual noises that might indicate a failing motor or pump.
These steps can help determine if the problem is a simple fix you can handle on your own, such as clearing a clogged hose, or if it indicates a more severe fault.
When Professional Repairs Are Necessary
While basic troubleshooting can resolve many issues, there are cases when professional repair is the safer and more effective route:
- Complex Electronic Failures: If your washer is displaying persistent error codes or the control board seems unresponsive, professional diagnostics are crucial to avoid further damage.
- Mechanical Breakdowns: Problems with the motor, pump, or internal transmission often require specialized tools and expertise to repair correctly.
- Warranty Considerations: If your Samsung washer is still under warranty, attempting a DIY repair could void it. Authorized technicians use approved parts and methods to maintain your warranty’s validity.
- Safety Risks: Any repairs involving electrical components or high-voltage parts should be handled by professionals to prevent injury.
When in doubt, it’s best to consult a certified repair service. Professionals have access to manufacturer-specific repair manuals and diagnostic tools that increase the likelihood of a lasting fix.
Professional Fixes: What to Expect
A reputable service technician will start by running a complete diagnostic test on your Samsung washing machine. Once the issue is identified, they may take actions such as:
- Replacing faulty sensors or electronic control boards that trigger error codes.
- Cleaning or replacing clogged filters, drain hoses, and pump components to restore proper drainage.
- Rebalancing or repairing motor assemblies to reduce excessive vibration and noise.
- Fixing or replacing door locks and latches to ensure safety and proper operation.
The goal of a professional repair is not only to fix the immediate issue but also to provide preventive advice to reduce the likelihood of future malfunctions. Technicians often inspect related components that might soon wear out, recommending part replacements as needed to avoid recurring problems.
Preventive Maintenance: Tips for Longevity
Keeping your Samsung washing machine in peak condition requires a blend of regular maintenance and occasional professional check-ups. Here are some effective strategies:
- Regular Cleaning: Clean the filter, drain hose, and pump area at least once a month to remove lint and debris.
- Descaling: In areas with hard water, mineral deposits can affect performance. Use a descaling agent as recommended by the manufacturer.
- Proper Loading: Avoid overloading the washer, which can strain the motor and pump, and always use the appropriate amount of detergent.
- Periodic Professional Inspections: Schedule an annual service call to ensure that all components are functioning correctly and to replace any parts showing signs of wear.
- Follow the Manual: Always refer to the user manual for specific maintenance recommendations tailored to your model.
By adopting these habits, you not only prevent common issues but also extend the overall lifespan of your appliance.
Case Studies: Real-World Success Stories
Consider the experience of Emily, who noticed her Samsung washer repeatedly displaying a “5E” error—indicative of a drainage problem. After a thorough DIY inspection revealed a partially blocked drain hose, she still encountered intermittent issues. Emily then called a professional repair service, which discovered a worn-out pump impeller. Replacing this part not only resolved the error but also improved the machine’s overall efficiency.
In another instance, James’s Samsung washer started to vibrate excessively during spin cycles. What began as a minor annoyance quickly escalated into a concern about potential damage. Professional technicians found that the machine’s suspension system was compromised, and they rebalanced the unit while replacing worn-out shock absorbers. The result was a quieter, more stable machine that James could rely on for years to come.
Samsung washing machines are built to offer convenience and efficiency, but even the best appliances need proper care and occasional expert attention. Whether you’re a DIY enthusiast or prefer to call in the professionals, understanding the common issues and their solutions is key to keeping your machine in top shape. With proactive maintenance and timely repairs, you can ensure that your washer not only lasts longer but also continues to perform at its best.
Embrace preventive practices, know when to take matters into your own hands, and don’t hesitate to seek professional help when needed. In doing so, you safeguard your investment and enjoy the seamless, stress-free operation of your Samsung washing machine for years to come.
Uncategorized
The Science Behind Streak-Free Windows: What Professionals Do Differently
When it comes to window cleaning, nothing beats the satisfaction of streak-free, crystal-clear glass. But achieving this pristine finish isn’t as simple as grabbing a cloth and some spray. Professional window cleaners have mastered the science behind streak-free windows, using specific techniques and tools to deliver flawless results. Here’s what they do differently and why their methods are so effective.
1. Using the Right Tools for the Job
Professionals don’t rely on standard cleaning products or paper towels to get the job done. Instead, they use high-quality tools specifically designed for window cleaning. Key items in their arsenal include:
- Squeegees: The cornerstone of any professional’s toolkit, squeegees ensure even water removal, leaving no streaks behind. The rubber blades are replaced regularly to maintain their effectiveness.
- Microfiber Cloths: Unlike traditional rags, microfiber cloths are lint-free and highly absorbent, making them perfect for detailing and edge cleaning.
- Specialized Cleaning Solutions: Professionals often use eco-friendly, ammonia-free solutions that dissolve dirt and grease without leaving residues.
- Water-Fed Poles: For high-rise or hard-to-reach windows, water-fed poles equipped with purified water systems are used to clean without streaking.
2. The Importance of Purified Water
One of the secrets to streak-free windows lies in the water itself. Tap water contains minerals, salts, and impurities that can leave behind spots and streaks when it dries. Professionals use purified water systems that remove these contaminants, ensuring a spotless finish.
Purified water also has a natural ability to dissolve dirt and grime more effectively than regular water. When combined with the right tools, it creates the perfect formula for crystal-clear windows.
3. Perfecting the Technique
The way professionals clean windows is just as important as the tools they use. Here are some techniques they employ to achieve streak-free results:
- Pre-Cleaning: Before tackling the glass, professionals remove loose dirt and debris from the surface to prevent scratches.
- Systematic Movements: Using a squeegee, they clean in overlapping strokes, starting at the top and working their way down. This ensures no spots are missed and prevents water from dripping onto already cleaned areas.
- Edge Detailing: Professionals pay special attention to the edges and corners of the glass, where streaks are most likely to form. Microfiber cloths are often used for this step.
- Drying Techniques: Any remaining water is carefully wiped away to prevent streaking. This step is crucial, especially in areas with high humidity.
4. Timing Matters
Professional window cleaners know that timing can make or break the outcome. Cleaning windows on a sunny day might seem like a good idea, but direct sunlight causes cleaning solutions to dry too quickly, leaving streaks behind. Professionals prefer overcast days or cooler parts of the day to ensure optimal results.
5. Safety First
For high-rise buildings or windows in hard-to-reach places, safety is a top priority. Professionals use specialized equipment like harnesses, ladders, and scaffolding to ensure they can clean effectively without compromising safety. This expertise allows them to tackle challenging jobs while maintaining streak-free quality.
6. Experience and Training
What truly sets professionals apart is their experience. Years of practice have honed their skills, allowing them to identify and address potential issues, like hard water stains or stubborn grime, before they become a problem. Their training ensures they can adapt to different types of glass and environments, delivering consistent results every time.
A Trusted Name in Toronto
When it comes to achieving streak-free windows, Toronto Window Cleaners has perfected the art. With over 20 years of experience, their team of fully trained and certified professionals uses advanced techniques and tools to deliver exceptional results. Whether it’s a residential property or a high-rise building, they’ve built a reputation for excellence across the Greater Toronto Area.
In conclusion, the science behind streak-free windows is a blend of using the right tools, employing expert techniques, and understanding the conditions that impact cleaning results. By trusting professionals, you’re not just ensuring sparkling windows—you’re investing in a methodical process that guarantees perfection every time.
You must be logged in to post a comment Login